Cable Operated Toilet Dual Flush Valve , Wc Flush Valve For Uk
Cable operated toilet flush valve P07081 is designed specially for
UK concealed cistern inside the bathroom furniture. It's fitted
with smaller thickness seal washer at 4mm, which could increase the
exposed length of outlet shank and make it easier for installation
and pipe connection. Meanwhile, it uses longer wire at 400mm to
provide enough flexiblity in installation. To compensate the
smaller thickness of plastic lid, an EVA gasket is offered for push
|Material:||ABS, POM, rubber, silicone|
|Net weight:||370g +/- 3%|
|Installation height:||180mm (from the upper rim of gasket to the top)|
|Discharge hole:||Two inch|
|Operation:||Manual flush, auto close|
|Body rotation:||90 degree|
|Seal washer:||4mm thickness|
|Overflow pipe:||Height adjustable from 210mm to 330mm, min. adjustment scale 5mm|
|Flushing rate:||>=2.2 Liters per seconds|
|Flush volume:||partial flush and full flush, both adjustable|
|Push button:||Compatible with lid hole dia. 18mm-50mm|
|Push button installation:||could be top / side / front mounted|
|Cable length:||400mm to match UK concealed cistern|
|Endurance:||100,000 times of partial flush and 100,000 times of full flush|
- Cable operated toilet flush valve to match most of toilets.
- WRAS approved.
- Made from strong high quality raw plastic material.
- Silicone rubber ensure water tightness and leakage free.
- 4mm thickness seal washer to match thickness of plastic cistern.
- Easy to install, totally tool free.
- Three layers high gloss plating, meeting 8H neutral salt spray
- Stylish chrome plated flush button, available in three types.
- Soft touch feeling, less than 20N.
- Long endurance, 5 years warranty.
- Suitable for UK concealed cistern.
- Easy access for maintenance.
We provide free samples for trial and evaluation. For sample
shipping cost, we leave it negotiable. There’re various ways to
send you samples:
- Send it separately via. express like DHL, FedEx, UPS, TNT, EMS,
etc. This is the fast way.
- If the sample volume is big and you don’t have a tight schedule, we
can ship it by air to the nearest airport to your place.
- If you have an agent or buying office in China mainland or Hong
Kong, we can send the samples to them and they can combine with
other samples for you together.
- If you have a shipment leaving China soon, you can send us the
contacts of the factory and we will send samples to them to put in
If you want to have your own logo on the product, you can choose
from laser etching, silk printing, adhesive label or mold carving.
Push button and tank lever are the parts exposed to end user. It’s
the best place to show your logo or brand name. And the finish of
these parts are chrome plated normally. Therefore, laser etching is
the best match for this kind of silver finish surface. But please
noted, the color of laser etching is always in grey.
If you’re selling the products to DIY markets and need to display
the products on shelves, you may need to have the logo printed on
the fill valve and / or flush valve, not only on the button or
lever. You can consider to use silk printing, especially when you
want to use vivid colors.
If you have higher requirements on the logo pattern and color
combination, it’s better to choose the label. It’s 4 C color
printed adhesive label in any pattern and size you need. Its
disadvantage is also easy to see, it could not be long lasting.
The last frequently used way is mold carving. This is a permanent
way to carry your logo on the product. But the MOQ will be higher
than any other ways as it need to make some revision on the
existing molds. Please remember not every position of the product
could be carved with your logo. Only some positions is applicable.
Please check with our sales team and get further help.