3 Inch Push Button Toilet Flush Mechanisms For One Piece Toilet
3 inch push button toilet flush mechanisms P0707A is a three inch
outlet dual flush valve for 1-pc W.C. It features in its accurate
flush volume adjustment system. Most dual flush valves have only
major adjustment device, i.e. partial flush adjustment float and
full flush adjustment piece. It's not enough for 3 inch toilet as
the mission of 3 inch flush valve is to save water while increase
rinsing power. It's important to reach ideal flush volume and each
millimeter counts. Therefore, it's designed with extra micro
adjustment device at the bottom of the body. With these additional
adjustment, the flush volume could be adjusted to satisfied level.
|Material:||ABS, POM, rubber, silicone.|
|Net weight:||370g +/- 3%|
|Installation height:||200mm (from the upper rim of gasket to the top)|
|Toilet cistern height:||240mm - 320mm|
|Outlet size:||3" for 1-pc toilet|
|Overflow pipe:||Fixed height customized per requirements|
|Body rotation:||360 degree|
|Flushing rate:||>=2.7 Liters per seconds|
|Flush volume:||partial flush and full flush, both adjustable|
|Residual water level:||35 - 65 mm for full flush, 70 - 120 mm for partial flush|
|Seal washer:||NBR rubber, flat|
|Endurance:||100,000 times of partial flush and 100,000 times of full flush|
|Push button installation:||Top mounted|
- Injection molded from ABS raw material.
- Heavy duty design.
- Accurate flush volume adjustment.
- Powerful rinsing flow(2.7L/s).
- 360 degree body rotation for easy adjustment.
- Leakage free silicone rubber flapper.
- Overflow pipe height customized per order.
- Soft hand feeling, less than 20N.
- Endurable solid stainless steel U-shape hook.
- Piece by piece inspection before packing.